1. Equipment performance:
It is used for the frame and corner assembly process of aluminum doors and windows, which can complete the corner code stamping connection of four corners at a time. Install corner codes and connectors on the worktable - automatic transmission into the host - automatic corner - forming - automatic output - work completed. The whole process of angle formation is automatically completed by the equipment without manual work, which greatly improves the degree of automation. Form assembly line operation, saving time, labor and labor.
The pressing device moves forward and backward automatically, and the operation is convenient
Special double locking structure design is adopted to effectively prevent the existence of gap after long-term use, and ensure the accuracy and service life of the equipment.
The hydraulic (gas-liquid pressurization) mechanism is adopted to make the system maintenance convenient
It is convenient to adjust the angle before and after to adapt to different profiles
Set up automatic transmission system, can be parallel operation, save workers loading and unloading time, greatly save labor, improve work efficiency.
2. Main specifications and technical parameters:
Power supply: 380V, 50Hz (three-phase four wire system) power: 3.7KW + 0.12kw × 2
Rated oil pressure: 15MPa; oil tank capacity: 60L
Working pressure of gas source: 0.5-0.8mpa gas consumption: 0.45l/time
Movement stroke of angle cylinder: 0-50 mm, width of applicable profile: 100 mm
Maximum frame size: 1600mm × 3000mm
Minimum frame size: 450mm × 675mm
Dimension error of diagonal length of forming window: ≤ 1mm (1500 × 1500mm)
Butt joint gap error: ≤ 0.15mm
Dimensions: (length × width × height) 4000mm × 1650mm × 2300mm
Weight: 2000kg