1. Equipment performance:
The main shaft of saw blade adopts high-precision spindle, and special imported cemented carbide saw blade
Imported precision linear guide rail is used for cutting feed motion, and imported linear bearing motion pair is used for left and right moving guide rail of machine head.
The feed of saw blade is powered by hydraulic damping cylinder
Wide processing range, cutting length of 4200 mm, cutting angle of 90 ° and 45 ° and automatic conversion of two angle buttons
The safety cover rises and falls automatically with the advance and retreat of the saw blade, with good safety
The air control valve controls the swing angle cylinder to avoid failure caused by long-term electrification of the solenoid valve
2. Main specifications and technical parameters:
Power supply: 380V 50Hz (three-phase four wire system) main motor power: power 2 × 2.2kw
Specification: φ 30 × 3100rpm saw blade
Maximum cutting width: 155 mm; maximum cutting height: 90 ° Max 300 mm; 45 ° Max 200 mm
Maximum sawing length: Max 4200mm minimum sawing length: min400m
Cutting angle: 90 ° 45 ° feed speed: stepless speed regulation 0-3m / min
Working pressure: 0.5mpa-0.8mpa gas consumption: 200L / min
Dimensions: (length × width × height) 5680mm × 1500mm × 1600mm
Weight: 1900kg